ContactSitemapLogin 
nanonis
HomeSPM-ControllerQuantum TransportPLLApplicationsReferencesCompany  
   
 

Nanonis Tramea Signal Output Add-on


Plenty of outputs for complex samples

Complex nanodevices require a large number of gate voltages, and this number is usually much larger than the number of signals to be digitized. While the 8 input channels of the Nanonis Tramea™ base configuration offer sufficient digitizing channels for most applications, 8 output channels might not cover all the requirements for sample driving voltages. One TSO instantaneously adds 16 high precision and low-noise 20-bit outputs to the Nanonis Tramea™ base configuration. For even more complex experiments, a maximum of 2 TSOs can be connected to the Nanonis Tramea™ base configuration, transforming the instrument into a 50 outputs and 8 inputs system. Never before has that number of signals been generated or acquired with similar performance.

TSO add-ons can be combined with TSC add-ons, leading to maxed-out configurations with 40 outputs and 24 inputs or 48 outputs and 16 inputs.

The TSO analog outputs have identical specifications to the analog outputs of the TSC (with the exception of the 22-bit hrdAC™ mode) meaning no compromise on signal quality. And while increasing the number of channels with conventional systems means adapting the measurement software and potentially changing the workflow, with Nanonis Tramea™ none of this is necessary. The additional TSO signals are seamlessly integrated into the Nanonis Tramea™ software allowing immediate productivity. All TSO channels can be accessed by the lock-in and function generator modules.



  Configurations
  • 24 outputs and 8 inputs with the base configuration and 1 TSO add-on
  • 40 outputs and 8 inputs with the base configuration and 2 TSO add-ons
  • 32 outputs and 16 inputs with the base configuration, 1 TSO add-on and 1 TSC add-on
  • 40 outputs and 24 inputs with the base configuration, 1 TSO add-on and 2 TSC add-ons
  • 48 outputs and 16 inputs with the base configuration, 2 TSO add-ons and 1 TSC add-on

Specifications

  Highlights
  • 16 additional high precision and low noise 20-bit analog outputs
  • Ultra-low drift and drift between channels owing to a central temperature-stabilized voltage reference
  • Up to a total of 40 output channels with 2 TSO add-ons and 48 output channels with 2 TSO and 1 TSC add-on
  • Seamless integration of additional channels in the software
  • Lock-in modules and function generator can drive any of the 16 outputs to add a modulation or custom waveforms with frequencies up to 40 kHz



 


Back  |   Print Page

nanonis   News & Events
Nanonis SO5/TSO 16-channel signal source released

The SO5 and TSO are 16-channel precision, low-noise analog output add on modules for the Nanonis SPM Control System and the Nanonis Tramea quantum transport measurement system. Nanonis Tramea users can profit from up to 48 temperature-stabilized 20-bit signal sources able to control even the most complex nanostructures. More information about the new instrument can be found here

New application note library online

Announcing our two new application notes galleries to highlight results from our SPM control system as well as the new Nanonis Tramea QTMS.

More »

All News »

nanonis   Address
        SPECS Zurich GmbH
        Technoparkstrasse 1
        8005 Zurich
        Switzerland

        Tel.:    +41-44 445 18 25
        Fax:    +41-44 445 18 26
        Mail: info@specs-zurich.com
                support@specs-zurich.com

© 2017 by Nanonis Powered by MySign