ContactSitemapLogin 
nanonis
HomeSPM-ControllerQuantum TransportPLLApplicationsReferencesCompany  
   
 

Nanonis OC4.5-Station - The Standalone Oscillation Controller


For the finest control of mechanical oscillators

The OC4.5-Station is the standalone version of the Oscillation Controller add-on module, specifically designed for Phase-Locked Loop (PLL) operation. With its extremely wide input range, from ±1mV ... ±10V and its bandwidth of 100 Hz to 5 MHz the OC4.5-Station is suited for almost any type of mechanical resonator - standard cantilevers, tuning forks, needle sensors, etc... whether in UHV, at low-temperature, in liquid, or in air. Its applications range from atomic resolution in Non-Contact AFM modes to Magnetic Resonance Force Microscopy (MRFM). Additionally, the integrated spectrum analyzer (FFT) and scope allows for thermal noise analysis of resonance peak.
The graphical user interface is hosted on a standard desktop or laptop PC. Communication is done via TCP/IP over a standard Ethernet port. With the possibility to connect it to any third party controller, the OC4.5-Station is a truly universal and versatile lab instrument.

OC4.5Station

Details and Specs: OC4 - The Oscillation Controller    Details and Specs: OC4 - The Oscillation Controller (566.4 kB)

  Highlights
  • Frequency range from 100 Hz to 5 MHz
  • Excitation output range from ±10mV up to ±10V
  • Frequency resolution below 1 nHz; stability of 1ppb/per day
  • 4 independent demodulators for Multifrequency operation
  • Advanced filtering: independent lock-in filters with selectable order (1. to 8.) and cut-off frequency (100 mHz to 50 kHz)  for each demodulator
  • Integrated oscilloscope and spectrum analyzer (FFT) with continuous display up to 5MHz
  • Frequency and phase sweep spectrum for maximum amplitude and minimum excitation
  • perfectPLL™ algorithm for auto-tuning of PLL parameters
  • Demodulation bandwidth up to 5 kHz
                              ... more about the OC4 »

  Add-On Modules

 


Back  |   Print Page

nanonis   News & Events
Nanonis SO5/TSO 16-channel signal source released

The SO5 and TSO are 16-channel precision, low-noise analog output add on modules for the Nanonis SPM Control System and the Nanonis Tramea quantum transport measurement system. Nanonis Tramea users can profit from up to 48 temperature-stabilized 20-bit signal sources able to control even the most complex nanostructures. More information about the new instrument can be found here

New application note library online

Announcing our two new application notes galleries to highlight results from our SPM control system as well as the new Nanonis Tramea QTMS.

More »

All News »

nanonis   Address
        SPECS Zurich GmbH
        Technoparkstrasse 1
        8005 Zurich
        Switzerland

        Tel.:    +41-44 445 18 25
        Fax:    +41-44 445 18 26
        Mail: info@specs-zurich.com
                support@specs-zurich.com

© 2017 by Nanonis Powered by MySign