ContactSitemapLogin 
nanonis
HomeSPM-ControllerQuantum TransportPLLApplicationsReferencesCompany  
   
 

High-Voltage Amplifiers for Piezo Scanners


Nanonis offers a low noise, high-voltage amplifier specifically designed for nanopositioning applications, such as piezotube scanner for either room temperature or low-temperature applications. With a noise level of only 70μVrms in a bandwidth of 300kHz, the HVA4 offers the lowest noise on the market in scanning probe applications.



Specs: High-Voltage Amplifier HVA4    Specs: High-Voltage Amplifier HVA4 (826.3 kB)

  State-of-the-Art Hardware

Built with the greatest care, the Nanonis High-Voltage Amplifier has the lowest noise on the market with a measured value below 70μVrms in a bandwidth of 300kHz. Specifically designed for SPM applications, it is perfectly suited for atomic resolution imaging on a STM or AFM set-up.

  4 Inputs / 6 Outputs

With 4 inputs and 6 outputs, the HVA4 can handle any type of piezotube scanner. X/Y, Z and AUX have independent turn-on switches with LED indicators. The auxiliary channel can for instance be used for high-voltage bias, interferometer regulation or to drive a simple coarse motor (with function generator module).

  Gain Selection

Each axis has 4 selectable gains from 3 predefined set depending on the application: (1, 4, 7, 14); (1, 4, 10, 22) or (1, 4, 15, 40). The actual gain is indicated with an LED on the front panel and digitally read-back by the software for a consistent use. The Z- and AUX- channels have a inverter switch to change output polarity.

 


Back  |   Print Page

nanonis   News & Events
Nanonis SO5/TSO 16-channel signal source released

The SO5 and TSO are 16-channel precision, low-noise analog output add on modules for the Nanonis SPM Control System and the Nanonis Tramea quantum transport measurement system. Nanonis Tramea users can profit from up to 48 temperature-stabilized 20-bit signal sources able to control even the most complex nanostructures. More information about the new instrument can be found here

New application note library online

Announcing our two new application notes galleries to highlight results from our SPM control system as well as the new Nanonis Tramea QTMS.

More »

All News »

nanonis   Address
        SPECS Zurich GmbH
        Technoparkstrasse 1
        8005 Zurich
        Switzerland

        Tel.:    +41-44 445 18 25
        Fax:    +41-44 445 18 26
        Mail: info@specs-zurich.com
                support@specs-zurich.com

        Privacy Policy

© 2018 by Nanonis Powered by MySign