ContactSitemapLogin 
nanonis
HomeSPM-ControllerQuantum TransportPLLApplicationsReferencesCompany  
   
 

Clients with customized solutions




Karl-Franzens-University Graz, Austria: The Nanooptics Group of Prof. Joachim R. Krenn uses a Nanonis SPM controller in combination with the  oscillation control module for their home-built tuning-fork PSTM (photon scanning tunneling microscope).





Université de Technologie de Troyes, France: Dr. Pascal Royer opted for the flexibility of the Nanonis controller for this new SNOM (Scanning Near-field Optical Microscope) set-up to be coupled with a FTIR spectrometer.





Institut Néel, Grenoble, France: Dr. Serge Huant preferred the Nanonis controller for his homebuilt microscopes. He now uses three Nanonis systems for Scanning Gate Microscopy at liquid helium temperature with tuning fork, a very sensitive microscope with interferometry detection to measure Casimir forces as well as a SNOM with photo-counter.





DPMC, Université de Genève, Switzerland: Prof. Patrycja Paruch switched to Nanonis to control an Omicron VT-AFM. It is now possible to easily switch between any AFM modes including piezo-response force microscopy (PFM). The OC4 is either used as a PLL or fast digital lock-in.





Chemistry Department, University of California in Los Angeles, USA: Prof. Jim Gimzewski opted for two complete Nanonis controllers for his original home-built Electrochemical-STM with atomic resolution in air or in liquid.





Federal Laboratories for Materials Testing, Dübendorf, Switzerland: In the group of Dr. Urs Sennhauser the home-built Scanning Near Field Optical Microscope (SNOM) is controlled by Nanonis SPM controller combined with the oscillation control module.





IMRE, Singapore: For his home-built BEEM microscope, Dr. Cédric Troadec preferred the Nanonis control system for maximum flexibility. For instance, the integration of the attocube positioners is done seamlessly through the Nanonis software.





Institut Néel, Grenoble, France. Prof. Hervé Courtois uses Nanonis to control his home-built STM/AFM with tuning fork and operating in an inverted dilution refrigerator. He appreciates the flexibility offered by the Nanonis programming interface in LabVIEW.





Nanotechnology Group, ETH Zurich, Switzerland: A control system with a double Phase Locked Loop to control a Veeco Multimode AFM in the group of Prof. A. Stemmer. The KPFM module is used in an advanced single pass technique. See the paper in Nanotechnology for the results.





Universität Regensburg, Germany: Prof. Ch. Back uses a Nanonis system for his home-made BEEM. The magnetization of the sample is controlled directly from the Nanonis interface.





Katholieke Universiteit Leuven, Belgium: Nanophysics group of Prof. Chris Van Haesendonck uses an extended Nanonis SPM control system for RF spectroscopy measurements with a home-built LT-SPM to investigate carbon nanotubes.





Catalysis Research Center, Hokkaido University, Japan: Dr. S. Suzuki uses the Nanonis SPM Control System for research with a Unisoku UHV AFM at the beamline of the Photon Factory in Tsukuba, Japan.





Laboratory of Ultrafast Spectroscopy, EPFL, Lausanne, Switzerland: Home-built Scanning Near Field Optical Microscope (SNOM) controlled by a Nanonis SPM control system with the oscillation control module.





Federal Laboratories for Materials Testing, Thun, Switzerland: Combination of a Scanning Electron Microscope and an non-contact SPM controlled by Nanonis Controller.

 


Back  |   Print Page

nanonis   News & Events
New application note library online

Announcing our two new application notes galleries to highlight results from our SPM control system as well as the new Nanonis Tramea QTMS.

More »

Press release

attocube systems AG and SPECS Surface Nano Analysis GmbH announce a collaboration in the field of quantum transport measurements at low temperatures (read more)

All News »

nanonis   Address
        SPECS Zurich GmbH
        Technoparkstrasse 1
        8005 Zurich
        Switzerland

        Tel.:    +41-44 445 18 25
        Fax:    +41-44 445 18 26
        Mail: info@specs-zurich.com
                support@specs-zurich.com

© 2017 by Nanonis Powered by MySign